High-Throughput Drug Screening Identifies a Potent Wnt Inhibitor that Promotes Airway Basal Stem Cell Homeostasis

1. Download : Download high-res image (99KB)
2. Download : Download full-size image

     

Structure of Cu2(indomethacin)4 and the reaction with superoxide in aprotic systems

The copper complex of indomethacin (1-(p-chlorobenzoyl)-5-methoxy-2-methyl-indole acetate), a common anti-inflammatory drug, was prepared and characterized. Crystal structure determination revealed the dimeric form of the 1:2 complex, namely Cu₂(indomethacin)₄ · L₂, in the unit cell. Suprisingly, the copper-copper distance (263 pm) was very close to metallic copper (256 pm). The two coordination sites in the copper-copper axis can be readily replaced by superoxide. An intriguing similarity to Cu₂(acetate)₄ was seen.Due to the lipophilic nature of the indomethacin ligand, this copper complex reacted with superoxide in aprotic solvents. The superoxide dismutating activity was successfully demonstrated in Me₂SO/water and acetonitrile/water mixtures using the nitro-blue tetrazolium assay and pulse radiolysis. The second-order rate constant of 6 · 10⁹ M^?1 · s^?1 in strictly aqueous systems dropped only slightly to 1.1 · 10⁹ M^?1 · s^?1 when aprotic solvents were used. This is the fastest rate constant ever observed for a copper-dependent dismutation of superoxide. The KO₂-induced lipid peroxidation in both erythrocytes and liver microsomes was suppressed by 70% in the presence of 1 · 10^?10 mol · ml^?1 of Cu₂(indomethacin)₄. The inhibitory action dropped to 25% when Cu₂Zn₂superoxide dismutase was employed. The formation of copper · indomethacin in rat serum after administration of indomethacin was shown in vitro and in vivo.     

Nonthermal Plasma‐Induced Degradation of Morin and Enhancement of Biological Activities

In the present study, non‐thermal dielectric barrier discharge (DBD) plasma of induced structural changes of morin resulted in the isolation of one previously undescribed benzofuranone derivative, along with two known compounds. The chemical structures of these degradation products were elucidated by UV, NMR and FAB‐MS spectroscopic analyses. The isolated three compounds showed potent antioxidative activities in two different tests, with IC₅₀ values in the range of 12.9–41.8 μm in the 2,2′‐azino‐bis (3‐ethylbenzothiazoline‐6‐sulfonic acid) (ABTS⁺) radical scavenging activity, 19.0–71.9 μm for hydroxyl radical scavenging activity test. Furthermore, the new methoxylated benzofuranone exhibited enhancement of inhibitory effects against pancreatic lipase with an IC₅₀ value of 90.7±1.6 μm , when compared to the parent morin. These results suggested that the degradation products isolated from plasma exposed morin might be beneficial for prevention of obesity and related diseases.     

Current and emerging commercial optical biosensors.

The field of commercial optical biosensors is rapidly evolving, with new systems and detection methods being developed each year. This review outlines the currently available biosensor hardware and highlights unique features of each platform. Affinity-based biosensor technology, with its high sensitivity, wide versatility and high throughput, is playing a significant role in basic research, pharmaceutical development, and the food and environmental sciences. Likewise, the increasing popularity of biosensors is prompting manufacturers to develop new instrumentation for dedicated applications. We provide a preview of some of the emerging commercial systems that are dedicated to drug discovery, proteomics, clinical diagnostics and routine biomolecular interaction analysis.     

Cyanobacteria passage through drinking water filters during perturbation episodes as a function of cell morphology, coagulant and initial filter loading rate

Eight pilot-scale in-line filtration trials were performed to evaluate the passage of cyanobacterial cells through drinking water filters after sudden increases in hydraulic loading rates. Trials were performed at 30 °C using two coagulant combinations (aluminum sulfate and cationic polymer or ferric chloride and cationic polymer), two initial filter loading rates (7 or 10 m/h) and two species of morphologically different cyanobacteria (Microcystis aeruginosa or Anabaena flos aquae). The filter was perturbed by instantaneously increasing the hydraulic loading rate by 50%. Filter influent and effluent water qualities were characterized by measuring turbidity, particles and chlorophyll a. The observed post-perturbation filter effluent chlorophyll a peaks were 1.6–48 times greater than the pre-perturbation averages. Chlorophyll a peaks were larger for M. aeruginosa than for A. flos aquae. Chlorophyll a peaks were also larger for the higher (10 m/h) than for the lower (7 m/h) initial filter loading rate. The post-perturbation effluent turbidity peaks were 1.4–7.2 times greater than the pre-perturbation averages. The post-perturbation effluent particle peaks were 6.5–25 times greater than the pre-perturbation averages. These results indicate that particles were a more sensitive indicator of cyanobacterial passage than turbidity.     

Preparation and Evaluation of Differently Sulfonated Styrene–Divinylbenzene Cross-linked Copolymer Cationic Exchange Resins as Novel Carriers for Drug Delivery

The differently sulfonated styrene–divinylbenzene cross-linked copolymer cationic exchange resins were prepared by oil-in-water polymerization and varied degrees of sulfonation. Several characteristics of the obtained resins were evaluated, i.e., Fourier transform infrared spectra, the ion-exchange capacity, microscopic morphology, size, and swelling. The resin characteristics were altered in relation to the degree of sulfonation, proving that differently sulfonated resins could be prepared. The behavior of chlorpheniramine (CPM) loading and in vitro release in the USP simulated gastric (SGF) and intestinal fluids (SIF) of the obtained resins were also evaluated. The CPM loaded in the resinates (drug-loaded resins) increased with the increasing degree of sulfonic group and hence the drug binding site in the employed resins. The CPM release was lower from the resins with the higher degree of sulfonic group due to the increase in the diffusive path depth. The CPM release was obviously lower in SGF than SIF because CPM, a weak base drug, ionized to a greater extent in SGF and then preferred binding with rather than releasing from the resins. In conclusion, the differently sulfonated resins could be utilized as novel carriers for drug delivery.     

Hybrid nanoreservoirs based on dextran-capped dendritic mesoporous silica nanoparticles for CD133-targeted drug delivery

In this study, the chemical features of dendritic mesoporous silica nanoparticles (DMSNs) provided the opportunity to design a nanostructure with the capability to intelligently transport the payload to the tumor cells. In this regard, doxorubicin (DOX)-encapsulated DMSNs was electrostatically surface-coated with polycarboxylic acid dextran (PCAD) to provide biocompatible dextran-capped DMSNs (PCAD-DMSN@DOX) with controlled pH-dependent drug release. Moreover, a RNA aptamer against a cancer stem cell (CSC) marker, CD133 was covalently attached to the carboxyl groups of DEX to produce a CD133-PCAD-DMSN@DOX. Then, the fabricated nanosystem was utilized to efficiently deliver DOX to CD133+ colorectal cancer cells (HT29). The in vitro evaluation in terms of cellular uptake and cytotoxicity demonstrated that the CD133-PCAD-DMSN@DOX specifically targets HT29 as a CD133 overexpressed cancer cells confirmed by flow cytometry and 3-(4,5-dimethyl-2-thiazolyl)-2,5-diphenyl-2-H-tetrazolium bromide assay. The potentially promising intelligent-targeted platform suggests that targeted dextran-capped DMSNs may find impressive application in cancer therapy.     

Hyperthermic treatment of chromomycosis with disposable chemical pocket warmers

A case of chromomycosis in which hyperthermia proved effective is reported. The patient was a 56-year-old male bean curd maker who, without any previous history of minor trauma, developed on the extensor side of the left upper arm an eczematous lesion that underwent gradual radial expansion. The lesion showed a well-defined, 7×10 cm infiltrated erythematous plaque with the central area healed and, at the upper and lower borders, adherent scales and crusts on the surface. Histological examination revealed granulomatous changes in the dermis, as well as sclerotic cells within giant cells and microabscesses. On culturing,Fonsecaea pedrosoi was isolated. The patient was treated with disposable chemical pocket warmers, which were secured over the lesion with a rather tight elastic bandage, so that they kept the affected area warm for 24 hours a day. After a month of such hyperthermic treatment, the erythema and infiltration had decreased considerably, and microscopic examination and culture of the crusts both yielded negative results. Examination of biopsy specimens of the lesion after the third month showed that it had cicatrized. The treatment was stopped after 4 months, and no relapse occurred. We also summarize the published results of local hyperthermic treatment of chromomycosis in Japan.     

Methods for rapid screening and isolation of bacteria producing acidic lipase: feasibility studies and novel activity assay protocols

Acidic lipase finds its commercial values in medical applications and bioremediation of food wastes. In this work, approaches for rapid screening of lipase-producing bacteria were developed and the feasibility assessment of the screening methods was performed. From food waste samples, the proposed screening procedures allowed isolation of sixteen pure bacterial strains expressing higher lipase activity at acidic pH (pH 6.0) than at alkaline pH (pH 9.0). To enhance the accuracy of lipase activity determination under acidic conditions, a novel assay procedure was also developed by deactivating lipase activity by microwave treatment prior to back titration. This additional step could minimize interferences arising from residual lipase activity during conventional direct back-titration methods in measuring lipase activity at acidic pH. Using the four strategies proposed in this work, the best acidic-lipase-producing isolate was obtained by strategy C (SSC) and was identified as Aeromonas sp. C14, displaying an optimal lipase activity of 0.7 U/ml at an acidic pH of 6.0.